Now high-rise buildings are rising from the ground, but who can pay attention to who is behind this silently, work is taking much risk, in order to ensure that the body for people, will see the rope net.

1.Safety net must be hung below the high working part;When the height of the building exceeds 4m, a safety net must be set up gradually rising with the wall, and then a fixed safety net should be set up every 4m;In the outer frame, bridge frame, the upper and lower holes must be set up safety nets.The erection of the safety net should be low and high, and the difference of the expenditure part of the rope net is generally about 50cm;No fracture or bending of the supporting rod;The gap between the inner edge of the net and the wall is less than 15cm;The distance between the lowest point of the net and the surface of the object below should be greater than 3m.The diameter of the small head of the wooden pole shall not be less than 7cm, the diameter of the small head of the bamboo pole shall not be less than 8cm, and the spacing of the rope net bracing rods shall not be greater than 4m.

2.Check whether the safety net is corroded and damaged before use.Construction to ensure that the safety net is complete and effective, reasonable support, force uniform, no sundries in the network.The lapping shall be tight and firm, without gaps. The safety net shall not be dismantled or damaged during the construction period. It shall be dismantled only when the operation is carried out without height.When the safety net that has been erected needs to be temporarily dismantled due to construction, the construction unit must notify and solicit the consent of the erecting unit before dismantling.After the completion of the construction, the construction unit must immediately resume the work according to the provisions and pass the inspection of the erection unit before it can be used.

3. rope net to often clean up the debris in the net, in the net above the implementation of welding operations, should take effective measures to prevent welding sparks fall on the net;Do not have a long time of serious acid and alkali smoke around the net.